Description
HAGER – 4701 – Surface Vertical Rod Exit Bar with Wide Stile Pushpad and 36″ Device Exit Only – Less Trim – Grade 1
Product Specifications:
Vendor | Hager Companies |
Manufacturer | Hager |
Grade | Grade 1 |
Installation | Commercial |
Unit of Measure | Each |
Application | Standard Duty |
Base Material | Aluminum |
Limited Warranty | 5 Years |
ADA Compliance | Yes |
Technical Specifications:
Physical Appearance | Wide Stile Pushpad |
Device Type | Surface Vertical Rod |
Mechanical Function | Exit Only |
Device Length | 36″ |
Hand | Non Handed |
Trim Type | Less Trim |
Door Material | Metal or Wood |
Door Width | 30″ – 36″ |
Fire Rated | Yes |
Product Type | Surface Vertical Rod Exit Devices |
Certifications:
- ANSI/BHMA A156.3-2014 Grade 1
- UL305 Listed for Panic Hardware
- UL/cUL Listed for up to 3 hours for “A” label single doors
- UL10C Positive Pressure Rated
- UL10B Neutral Pressure Rated
- Warnock Hersey listed for up to 3 hours with fire rated removable mullion
- Complies with ANSI A117.1 for accessible buildings and facilities
Stile Width:
- 5-3/8″ (137mm) – Minimum stile width required for single doors and standard 5/8″ (16 mm) stop
- 4-7/8″ (124mm) – Minimum stile width required for double door x surface vertical rod with double door strike
- 5-3/4″ (146mm) – Minimum stile width required for double door and 2″ (51 mm) mullion
- 5″ (127mm) – Minimum stile width required for double doors with a middle rail and a 2″ mullion
- All stile widths are measured from the door edge
Strikes:
- Stainless steel with plated rollers – Included standard with panic devices
- Solid stainless steel – Included standard with fire-rated devices
- Surface applied to frame with slotted holes for easy adjustment
- Double door strike for use with surface vertical rod and rim device available
- For Rim x Rim x Mullion the 4912 strike is required on a fire-rated opening
Dogging:
- Hex key dogging standard on panic rated devices
- Cylinder dogging available on panic rated devices – specify “CD”. 3902 Mortise cylinder with standard cam sold separately. Cylinder Length of 1-1/8″ (29mm) – 1-3/8″ (35mm) is required
Reviews
There are no reviews yet.